GE Vivid S5 N Service Manual page 737

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
8-8-2 Preparation
4.) Under Advanced, select Display Control, then press <Enter>.
5.) From the available options, change the Display Mode to CRT+LCD.
6.) Check that Flat Panel Type is set to SVGA.
2
EVISION
(cont'd)
Figure 8-262 Changing Display Control Mode
Figure 8-263 Display Mode - CRT+LCD
Figure 8-264 Flat Panel Type - SVGA
Chapter 8 - Replacement Procedures
VS5 N VS6 N
S
AND ERVICE
M
ANUAL
8-211