GE Vivid S5 N Service Manual page 64

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
Section 2-2
Console Requirements
2-2-1 Unit Environmental Requirements
Table 2-2
Requirement
Operational
Storage
Transport
NOTE: The Vivid™ S5 N and Vivid™ S6 N system may be operated at an altitude of up to 3000 meters
(9842 ft)
If the system has been in storage or has been transported, please see the acclimation
CAUTION
requirements before powering
page
NOTE: After a long period of storage, or after transportation of the system with the monitor in the folded-down
position, it is highly recommended to place the monitor in the upright position - and to leave it in this
position for a period of longer than 1 hour before use. This will enable it to properly adjust to the
environmental conditions.
2-2-2 Cooling Requirements
The cooling requirement for the Vivid S5 N or Vivid S6 N ultrasound unit environment is 3500 BTU/hr.
This figure does not include the cooling required for lights, people, or other equipment in the room.
NOTE: Each person in the room places an additional 300 BTU/hr demand on the environmental
cooling.
2-2-3 Lighting Requirements
For system installation, updates and repairs, bright lighting is required. However, operator and patient
comfort may be optimized if the room lighting is subdued and indirect when a scan is being performed.
Therefore, a combination lighting system (dim/bright) is recommended. Keep in mind that monitor
lighting can be adjusted automatically on the Vivid S6 N if this option is used.
2-2
2
EVISION
Environmental Requirements
10 — 40
-20 — 60
-20 — 60
3-2.
Section 2-2 - Console Requirements
Temperature
o o
C (50 — 104 F)
o o
C (-4 — 140 F)
o o
C (-4 — 140 F)
and/or using the system.
ON
VS5 N VS6 N
AND
Relative Humidity
(non-condensing)
30 — 85%
700 — 1060 hPa
30 — 70%
700 — 1060 hPa
30 — 70%
700 — 1060 hPa
3-2-2 "Installation Warnings" on
S M
ERVICE ANUAL
Air Pressure