Oral-B iO6 Manual page 10

Hide thumbs Also See for iO6:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
During high pressure the brush head movement will be
reduced (in «Daily Clean», «Intense» and «Sensitive»
modes).
Periodically check the operation of the Smart Pressure Sensor
by pressing moderately on the brush head during use.
Note: During the use of the Oral-B App, the Smart Pressure
Sensor feedback may be inactive for some features.
Note: Smart Pressure Sensor is deactivated during «Tongue
Clean» mode (depending on model).
Brushing modes (depending on model)
Your toothbrush offers different brushing modes indicated on
the display:
«Daily Clean» – Standard mode for daily cleaning
«Sensitive» – Gentle, yet thorough cleaning for sensitive areas
«Whiten» – Polishing for occasional or everyday use
«Gum Care» – Gentle massage of gums
«Intense» – For an extraordinary clean feeling
(operated with a higher speed)
«Super Sensitive» – Super gentle cleaning for extra sensitive
areas
«Tongue Clean» – Tongue cleaning for occasional or everyday
use
Note: The sequence and availability of brushing modes may
vary depending on model purchased.
When operating the «Tongue Clean» mode, we recommend
using a «Gentle Care» brush head (d). You can brush your
tongue either with or without toothpaste. Brush the whole area
of your tongue systematically in gentle movements. The rec-
ommended brushing time is 30 seconds; the motor stops after
30 seconds.
Mode setting:
You may first choose your default mode by pressing the mode
button (8) successively once the handle is awake (display
turned on). Select a mode by pressing the on/off button (7).
Your toothbrush starts in the selected default mode. You may
also change modes during brushing.
Note: You may also customize mode settings via Oral-B App.
Interactive Display
Turn on the interactive display (4) by pressing the on/off button
(7). If not further instructed on the display, you may toggle with
the mode button and select with the on/off button.
(10-16) «Mode selection» – toggle by pressing the mode but-
ton and select default start mode with on/off button.
10
91451398 _iO6_EE_75x155.indd 10
91451398 _iO6_EE_75x155.indd 10
23.11.20 10:09
23.11.20 10:09

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents