Mask, Fender; Removing The Front Fender; Installing The Front Fender; Removing The Start Number Plate - Husqvarna FS 450 2015 Repair Manual

13

MASK, FENDER

13.1 Removin the front fender
13.2

Installing the front fender

Preparatory work
-
Remove the start number plate.
Main work
O.
-
Remove screws Remove the front fender.
-
Ensure that the spacers remain in position.
Main work
-
Ensure that the spacers are mounted in the fender.
-
Position the front fender. Mount and tighten screws
Guideline
I
Remaining screws, chassis
Finishing work
-
Install the start number plate.
late
O
-
Remove screw and take off the clamp.
-
Remove screw @}.Take off the start number plate.
late
-
Position the start number plate. Mount and tighten screw
Guideline
I
Remaining screws, chassis
✓ The holding lugs engage.
-
Position the brake line and clamp. Mount and tighten screw @}.
(!,Jl p. 90)
O.
(� p. 90)
90
I 10Nm(7.41bf ft)
O.
I 10Nm(7.41bf ft)