Servicing The Shock Absorber - Husqvarna FS 450 2015 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.12 Servicin the shock absorber
A
Caution
Parts of the shock absorber will fly off if the shock absorber is disassembled incorrectly.
Risk of injury
The shock absorber is filled with highly compressed nitrogen.
-
Please follow the description provided.
-
Position the angle lever.
-
Mount screw connection
Guideline
I
Nut, linkage lever on swingarm
O
-
Mount screw but do not tighten yet.
Guideline
Screw, bottom shock
absorber
• Info
I
Raise the wheel slightly to make it easier to mount the screw.
-
Position the linkage lever.
-
Mount and tighten fitting @.
Guideline
I
Nut, linkage lever to angle lever
• Info
I
Raise the wheel slightly to make it easier to mount the screw.
O.
-
Tighten screws
Guideline
Screw, bottom shock
absorber
@).
-
Tighten fitting
Guideline
I
Nut, linkage lever on swingarm
Finishing work
-
Remove the motorcycle from the lift stand.
Condition
The shock absorber has been removed.
@)
but do not tighten yet.
I
M14x1.5
M10 60 Nm
(44.3 lbf ft)
I
M14x1.5
M10 60 Nm
(44.3 lbf ft)
I
M14x1.5
(a p. 10)
53
I 80 Nm (59 lbf ft)
Loctite ® 2701 TM
I 80 Nm (59 lbf ft)
Loctite
® 2701 TM
I 80 Nm (59 lbf ft)