Table of Contents
Advertisement
17
ENGINE
Installing the starter motor
17.5.32
17.5.33
Installing the oil filter
Installing the clutch push rod
17.5.34
17.5.35 Installing the oil screens
Grease the O-ring.
-
Mount the starter motor.
Mount and tighten screws
Guideline
I
Screw, starter motor
-
Tilt the motorcycle to one side and fill the oil filter housing to about 1 /3 full with
engine oil.
O
-
Insert oil filter
into the oil filter housing.
-
Oil the O-ring of the oil filter cover.
8.
-
Mount oil filter cover
-
Mount and tighten screws (5).
Guideline
I
Screw, oil filter cover
O.
-
Mount clutch push rod
Mount and tighten screw plug
Guideline
I
Screw plug, oil screen
O.
O
with the short oil screen and the O-ring.
I
M20x1. 5
186
1 10 Nm (7.4 lbf ft)
I 6 Nm (4.4 lbf ft)
I
1 1 5 Nm (11.1 lbf ft)
Advertisement
Table of Contents
