Table of Contents
Advertisement
20
LUBRICATION SYSTEM
Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding
-
Wear suitable protective clothing and safety gloves.
-
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Environmental hazard
-
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable
regulations.
Info
Drain the engine oil only when the engine is warm.
Engine and gear oil get very hot when the motorcycle is ridden.
Hazardous substances cause environmental damage.
Preparatory work
-
Park the motorcycle on a level surface.
Main work
-
Place a suitable container under the engine.
-
Remove oil drain plug
Remove screw plug
Info
Do not remove screw f).
Remove screw plug
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing surfaces.
-
Mount and tighten screw plug
Guideline
I
Screw plug, oil screen
O
with the magnet and seal ring.
8
with the short oil screen and the O-rings.
8
with the long oil screen
@)
8
with the short oil screen and the O-rings.
I
M20x1. 5
196
and the O-rings.
1 5 Nm (11.1 lbf ft)
1
I
Advertisement
Table of Contents
