Adding Engine Oil; Checking The Engine Oil Pressure - Husqvarna FS 450 2015 Repair Manual

20
LUBRICATION SYSTEM

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
20.5
Danger
Danger of poisoning
result in unconsciousness and death.
-
Always make sure there is sufficient ventilation when running the
engine.
-
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
-
Start the engine and check that it is oil-tight.
Finishing work
-
Check the engine oil level.
-
Remove the oil filler plug
-
Add the same engine oil that was used when the motor was changed.
I
Engine oil (SAE 1 0W/50)
• Info
I
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
-
Install and tighten the oil filler plug with 0-ring.
Danger
Danger of poisoning
result in unconsciousness and death.
-
Always make sure there is sufficient ventilation when running the
engine.
-
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
-
Start the engine and check that it is oil-tight.
Main work
-
Place a suitable container under the engine.
O.
-
Remove screws Remove the oil filter cover with the 0-ring.
-
Remove the oil filter.
I
Circlip pliers reverse (51012011000)
8
-
Position special tool
Guideline
I
Screw, oil filter cover
I
Oil pressure adapter (75029094000)
Connect the pressure tester without the t-plate to the special tool.
I
Pressure tester (61029094000)
-
Check the engine oil level.
Exhaust gases are toxic and inhaling them may
(llill p. 195)
O
with the 0-ring from the clutch cover.
(� p. 222)
Exhaust gases are toxic and inhaling them may
(� p. 228)
with the 0-ring. Mount and tighten the screws.
(llill p. 232)
(� p. 230)
(� p. 195)
198
I 6 Nm (4.4 lbf ft)