Mask, Fender; Removing The Front Fender; Installing The Front Fender; Removing The Start Number Plate - Husqvarna FC 250 2015 Repair Manual

13

MASK, FENDER

13.1 Removin the front fender
Preparatory work
-
Remove the start number plate.
Main work
O
-
Remove screws and @. Remove the front fender.
Main work
-
Position the front fender. Mount and tighten screws
Guideline
I
Remaining screws, chassis
Finishing work
-
Install the start number plate.
O
- Take brake line
out of the brake line guide.
-
Remove screw @.Take off the start number plate.
(!,Jl p. 82)
O
and @.
(!,Jl p. 83)
82
110Nm(7.41bf ft)