Table of Contents
Advertisement
WHEELS
14
-
Check the chain sliding guard for wear.
If the lower edge of the chain pins is in line with or below the chain sliding
guard:
-
Change the chain sliding guard.
-
Check that the chain sliding guard is firmly seated.
If the chain sliding guard is loose:
-
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain sliding
guard
-
Check the chain sliding piece for wear.
If the lower edge of the chain pins is in line with or below the chain sliding
piece:
-
Change the chain sliding piece.
-
Check that the chain sliding piece is firmly seated.
If the chain sliding piece is loose:
-
Tighten the screw on the chain sliding piece.
Guideline
Screw, chain sliding piece
-
Check the chain guide for wear.
•
Info
I
Wear can be seen on the front of the chain guide.
If the light part of the chain guide is worn:
-
Change the chain guide.
-
Check that the chain guide is firmly seated.
If the chain guide is loose:
-
Tighten the screws on the chain guide.
Guideline
Remaining screws, chassis
Finishing work
-
Remove the motorcycle from the lift stand.
M6
6Nm
(4.4 lbf ft)
M8
M6
(I!!:!
p. 10)
101
Loctite
243
®
™
15 Nm
(11 .1 lbf ft)
10 Nm
(7.4 lbf ft)
Advertisement
Table of Contents
