Installing The Fork Protector; Conducting Major Fork Service; Conducting Minor Fork Service - Husqvarna FS 450 2015 Repair Manual

6
FORK, TRIPLE CLAMP
Conductin ma·or fork service
Info
The steps are identical for both fork legs.
u
0

Conducting minor fork service

Info
The steps are identical for both fork legs.
rotector
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
I
Remaining screws, chassis
-
Position the brake line and clamp. Mount and tighten screws
-
Position the fork protector on the right fork leg. Mount and tighten screws fi).
Guideline
I
Remaining screws, chassis
Condition
The fork legs are disassembled.
-
Disassemble the fork legs.
-
Disassemble the cartridge.
-
Disassemble the piston rod.
-
Disassemble the screw cap with the membrane holder.
-
Disassemble the screw sleeve.
-
Check the fork legs.
-
Change the pilot bushing.
-
Assemble the screw sleeve.
-
Assemble the screw cap with the membrane holder.
-
Assemble the piston rod.
-
Assemble the cartridge.
-
Assemble the fork legs.
200974-01
Condition
The fork legs are disassembled.
I
M6
(l!!ll p. 16)
(!!J p. 18)
(!!J p. 20)
(!!J p. 23)
(!!J p. 23)
(!!J p. 26)
(!!J p. 27)
(� p. 28)
(� p. 29)
(l!!ll p. 31)
15
O.
1 10 Nm (7.4 lbf ft)
8.
1 10 Nm (7.4 lbf ft)
(!!J p. 22)
(� p. 27)