Changing The Rear Wheel Bearing - Husqvarna FS 450 2015 Repair Manual

WHEELS
14
14.7.11

Changing the rear wheel bearing

-
Have an assistant operate the rear brake.
-
Mount and tighten screw
Guideline
Screw, engine sprocket
-
Position the engine sprocket cover.
-
Mount and tighten screw
I Guideline
Screw, clutch slave cylinder
-
Mount and tighten screw
Guideline
I
Remaining screws, chassis
Finishing work
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the rear wheel.
Main work
O.
-
Remove shaft seal ring
8.
-
Remove lock ring
@).
-
Remove shaft seal ring
-
Using a suitable tool, press bearing
0.
-
Remove spacing tube
@)
with the washer.
M10
60 Nm
(44.3 lbf ft)
O.
8.
(� p. 10)
(� p. 10)
(� p. 96)
8
out from the inside to the outside.
104
Loctite ® 2701
TM
10 Nm (7.4 lbf ft)
I I
25 Nm (18.4 lbf ft)