Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna FS 450 2015 Repair Manual

EXHAUST
10
Removin the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.

Installing the main silencer

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
-
Remove the right side cover.
Main work
O.
-
Detach spring
I
Spring hook (50305017000)
8
-
Remove screws and take off the main silencer.
Main work
-
Mount the main silencer. Mount screws
8.
Attach spring
I
Spring hook (50305017000)
O.
-
Tighten screws
I
Guideline
Remaining screws, chassis
Finishing work
-
Install the right side cover.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
(I!!.:! p. 79)
(� p. 228)
O,
but do not tighten yet.
(� p. 228)
(ll!:,! p. 80)
(ll!:,! p. 79)
(ll!:,! p. 75)
75
10 Nm (7.4 lbf ft)