Table of Contents
Advertisement
SHOCK ABSORBER, SWINGARM
9
9.23
Assemblin
-
Mount the compression shim stack
201418-10
-
Sand both sides of piston
-
Clean the piston.
-
Assemble the piston.
Guideline
View6)
ViewC,
-
Mount the rebound shim stack @ with the smaller shims facing upward.
201420-10
-
Mount washer @ with the collar facing downward.
-
Grease the thread of the piston rod.
I
Lubricant (T152)
-
Mount and tighten nut
I
Guideline
Nut, piston rod
Preparatory work
-
Assemble the seal ring retainer.
-
Assemble the piston rod.
0
with the smaller shims facing downward.
(D
on a surface plate using 1200-grit sandpaper.
Piston from above
Piston from below
(�
p. 224)
@).
I
M16x1
(a
p. 60)
(a
p. 61)
62
I
I
45 Nm (33.2 lbf ft)
Advertisement
Table of Contents
