Applying New I/O End Cap Function Labels - Cisco 3200 Series Upgrade Manual

Chapter 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure

Applying New I/O End Cap Function Labels

To apply new I/O end cap function labels, follow these steps:
Identify the labels on the I/O end cap you want to change.
Step 1
Step 2 Peel off the new labels from the label set you received from Cisco.
Step 3 Place the new labels over the old labels, as show in
applied over an old label.)
Figure 3-17
1
1
OL-15983-01
Attaching I/O Function Labels
Label
Figure 3-17. (Figure 3-17
Cisco 3200 Series Router Hardware Upgrade Guide
Card Replacement Process
shows one new label being
3-17