Cisco 3200 Series Upgrade Manual page 31

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
For a 2-WMIC configuration, connect cables to the wiring card as shown in
Figure 2-13
4
1
Connect the FESMIC 10-pin FE1X cable to
port J14 on the wiring card.
3 Connect the FESMIC 10-pin FE3X cable to
WMIC 1.
OL-15983-01
2-WMIC Configuration
1 2
3
2
Connect the FESMIC10-pin FE2X cable to
WMIC 2.
4 Connect the WMIC 2 24-pin cable to port J2
on the wiring card.
Cisco 3200 Series Router Hardware Upgrade Guide
Card Replacement Process
Figure 2-13.
2-15