Cisco 3200 Series Upgrade Manual page 19

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
Step 2 Carefully pull off the end cap without disconnecting the antenna cables, if present.
antenna cables.
Caution Support the end cap to prevent damage to the antenna connectors.
Figure 2-2
1 WMIC 1 primary antenna cable
3
WMIC 2 primary antenna cable
5 WMIC 3 primary antenna cable
7
Power cable
OL-15983-01
Removing the Antenna End Cap
1 3
2
7
5
4 6
2 WMIC 1 secondary antenna cable
4
WMIC 2 secondary antenna cable
6 WMIC 3 secondary antenna cable
Cisco 3200 Series Router Hardware Upgrade Guide
Card Replacement Process
Figure 2-2 shows the
2-3