Table of Contents
Advertisement
Setting Fence Stops
The fence stops simplify the task of adjusting the
fence to 90˚ and 135˚ (45˚ outward).
Tools Needed
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Open-End Wrench 12mm .................................. 1
Setting 90° Fence Stop
1.
Use a 90˚ square to adjust fence to 90˚ (see
Figure 66).
Figure 66. Example of adjusting fence to 90˚.
2.
Flip 90˚ swing stop into position shown in
Figure 67.
3.
Loosen jam nut on 90˚ fence stop bolt (see
Figure 67).
Fence Stop Bolt
Jam Nut
Figure 67. 90˚ swing stop engaged.
4.
Adjust the 90˚ fence stop bolt until it makes
contact with 90˚ swing stop.
5.
Retighten jam nut loosened in Step 3.
Model G0814/G0814X (Mfd. Since 04/22)
Qty
Swing Stop
Setting 135° Fence Stop
1.
Disengage swing stop (see Figure 67).
2.
Use a sliding bevel adjusted to 135˚ to adjust
fence to 135˚ (45˚ outward) position, as
shown in Figure 68.
Figure 68. Example of adjusting fence 45˚
outward.
3.
Loosen jam nut on 135˚ stop bolt (see
Figure 69).
135° Stop Bolt
Figure 69. Location of 135˚ stop bolt and
jam nut.
4.
Adjust 135˚ stop bolt until it makes contact
with back of fence.
5.
Retighten jam nut loosened in Step 3.
Jam Nut
-47-
Advertisement
Table of Contents
