Table of Contents
Advertisement
Available languages
Available languages
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Do not touch the saw chain with
bare hands. Always wear gloves when handling
the saw chain.
Assembling the tool
1.
Remove 2 caps from the pipe, and 1 cap from the
head of the tool.
1
Fig.7
► 1. Cap 2. Pipe 3. Head of tool
2.
Loosen 3 bolts, and then remove 1 bolt using the
hex wrench.
1
Fig.8
► 1. Bolt
2
1
1
3
11 ENGLISH
3.
Insert the pipe into the tool body all the way, and
then align the hole on the pipe with the hole on the tool
body.
Fig.9
► 1. Hole 2. Pipe
4.
Tighten 3 bolts using the hex wrench.
Fig.10
► 1. Bolt
5.
Loosen 2 bolts, and then remove 1 bolt.
1
Fig.11
► 1. Bolt
1
2
1
Advertisement
Table of Contents
