Additional Safety For Ring Roll Benders - Grizzly G0792 Owner's Manual

Additional Safety for Ring Roll Benders

Serious injury or death can occur from fingers, clothing, jewelry, or hair becoming entangled/
crushed in rotating or moving parts. Workpieces not seated properly on rollers can fall and
cause crushing injury to feet. To minimize risk of injury, anyone operating this machine MUST
completely heed hazards and warnings below.
AVOIDING ENTANGLEMENT. Becoming entan-
gled in moving parts of this machine can cause
pinching and crushing injuries. To avoid these
hazards, DO NOT wear loose clothing, gloves, or
jewelry, and tie back long hair.
HAND PLACEMENT. Holding workpiece too
close to rollers during operation increases risk
of pinching and crushing injuries. To reduce your
risk, keep hands away from rollers during opera-
tion. NEVER place hands and fingers near rollers
during operation.
FOOT PROTECTION. Heavy workpieces acci-
dentally falling off of rollers during operation can
cause crushing injuries to the feet of operator.
To reduce your risk, wear steel-toed boots when
using machine.
-8-
FEEDING WORKPIECE. Forcefully jamming
workpiece through rollers could cause hands or
fingers to slip and get caught in moving parts,
causing pinching and crushing injuries. Only
advance workpiece using foot pedals. DO NOT
use hands to force workpiece through rollers.
USING CORRECT STOCK FOR OPERATION.
Using incompatible stock with installed rollers
can cause it to be ejected from machine during
operation, causing personal injury or damaging
workpiece or machine. Only bend material that is
compatible with installed rollers.
Model G0792 (Mfd. Since 12/15)