Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1 & 2 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
A
B
C
Figure 1. Upper controls and components.
A. Emergency Stop/RESET Buttons (2): Stop
all machine functions when pressed. Twist
clockwise to reset.
B. Lower Rollers (2): Rotate to feed workpiece
through headstock.
C. Upper Roller: Presses workpiece against
lower rollers to create bend. Adjusts toward
or away from lower rollers depending on
workpiece dimensions and desired radius.
D. Upper Roller Crank Handle: Adjusts posi-
tion of upper roller relative to lower rollers.
Moving upper roller closer to lower rollers
increases bend in workpiece.
-4-
manual
BEFORE
D
E
F
G
E. Guide Rollers (2): Used to correct or create a
twist in workpiece.
F.
Guide Roller Adjustment Bolts (4): Rotate
to adjust guide roller positions.
G. Headstock: Houses motor, drive gears, and
bending components (B–E). Can be adjusted
to vertical or horizontal bending positions.
H
I
J
Figure 2. Lower controls and components.
H. Control Pedestal: Allows user to control
machine while standing away from moving
parts and workpiece.
I.
Foot Pedal Feed Controls: When pressed,
cause rollers to feed workpiece to left or right
(as viewed when facing front of machine).
When released, rollers stop.
J.
Main Power Switch: Toggles incoming
power ON or OFF.
K. Power ON Button: Enables power to machine
components. Illuminates when energized.
L.
Electrical Panel Access Door: Opens for
access to electrical panel.
Model G0792 (Mfd. Since 12/15)
K
L
Advertisement
Table of Contents
