Direct Attached Storage
2. Insert the other end of USB cable into the USB port on the desktop or notebook to which you are adding the DNS-313.
3. Turn on the power button of the DNS-313. In Windows 2000, XP, and Vista, the DNS-313 will automatically install upon power-on.
4. Open My Computer and the new drive will be present. By default it will
use the first available drive letter.
Note:
When using the DNS-313 as a USB 2.0 port portable drive,
the Network Storage functionality will be disabled. To
re-enable Network Storage functionality, please power off the
DNS-313 and unplug the USB cable. Then, plug in the
Ethernet Cable and power back on the DNS-313.
D-Link DNS-313 User Manual
50