D-Link STORAGE DNS-313 User Manual page 11

Hardware Setup
5. Connect an Ethernet cable into the available Ethernet port. This cable should connect the DNS-313 to your local network or directly to a
computer for configuration.
6. Finally, connect the power adapter to the power receptacle.
When a new hard disk is installed, the hard disk must first be formatted in the DNS-313 before it can be used. Insert the Installation CD into your
computer's CD/DVD drive and follow the instructions to use the Click 'n Connect utility to format the new hard disk.
All installed hard disks must first be formatted in the DNS-313 before use.
D-Link DNS-313 User Manual
Note: When a hard disk is installed, the hard disk must first be formatted in the
DNS-313 before it can be used. Insert the Installation CD into your computer's
CD-ROM or DVD-ROM drive and follow the instructions below to use the Easy
Search Utility to establish a network link to the DNS-313. Then use the
web-based management software to format the new hard disk.
All installed hard disks must first be formatted in the DNS-313 before use.
8