D-Link STORAGE DNS-313 User Manual page 22

Setup Utility
3. Select the listed DNS-313 and click the Configuration button. This will launch
the computer's default web browser and direct it to the IP address listed for the
device. Make sure the browser is not configured to use a proxy server.
The first window that appears requires the user to login for Configuration menus or
Downloads menus. The Downloads menus are described later in this guide in the
section titled Downloads on page 38.
Note: The computer used to access the DNS-313 web-based configuration
manager must be on the same subnet as the DNS-313. If your network
is using a DHCP server and the computer receives IP settings from
DHCP, the DNS-313 will automatically be in the same subnet.
4. The login menu appears in the web page. Type the default User Name admin
and click the Configuration button. Note there is no default password to login.
If the web browser is unable to connect to the web manager of the DNS-313,
check to make sure your computer is on the same subnet as the DNS-313. For
example, if there is no DHCP server active, your computer will need an IP
address in the 192.168.0.0 subnet. Your computer should have an IP address
of 192.168.0.x where x equals a number from 1 to 31, or 33 to 254.
D-Link DNS-313 User Manual
19