Lan Setup - D-Link STORAGE DNS-313 User Manual

Configuration

LAN Setup

The LAN Settings menu is used to configure IP settings and
DHCP client status of the network storage device. The default
IP settings for the DNS-313 are initially as a DHCP Client.
However, if no DHCP server is detected, the device will default
to a Static IP address (192.168.0.32). When the DNS-313 is in
DHCP Client mode, no further IP settings configuration is
necessary. If the device requires use of DNS service, DNS
server IP addresses can be entered in the DNS1 and DNS2
entry fields.
If a Static IP address is preferable, change the IP address and
subnet mask to suit your network.
The LAN Settings menu is also used to enable or disable the
LLTD (Link Layer Topology Discovery) responder setting. This
is used to provide information to network topology display
monitors such as those included with Windows Vista.
Click on the Save Settings button to apply and save the new
settings. If you are changing the IP address or DHCP client
status of the device, it will be necessary to log in again using
the new IP address. If you do not know the new address (as
would likely be the case when changing from a static IP
address to DHCP client) use the Easy Search Utility on the
Installation CD to find the IP address of the device.
D-Link DNS-313 User Manual
28