Easy Search Utility - D-Link STORAGE DNS-313 User Manual

Setup Utility
If the hard disk has not yet been formatted, follow the instructions below to change the device IP
settings or to map the drive to your Windows computer using the Easy Search Utility. Then use
the Easy Search Utility to map the drive to your computer.
1. Click the Easy Search Utility link. A new menu appears.
2. The DNS-313 will appear listed under Network Storage Devices. If none are listed,
click the Refresh button. If a DHCP server is active on your network, the DNS-313
will receive an IP address by DHCP. If no DHCP server is present, the IP address
192.168.0.32 is used.
Note: When first powered on, during the initial boot sequence, the
DNS-313 will wait to be assigned an IP address via DHCP. If it
does not receive a DHCP assigned IP address, by default it will
have a self-assigned IP address of 192.168.0.32.
D-Link DNS-313 User Manual

Easy Search Utility

18