Grizzly T32794 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T32794 Universal Sharpening Jig pro-
vides support for tool sharpening on the Model
T32720 10" Wet Grinder.
To reduce your risk of
serious injury, read this
entire
using machine.
Figure 1. Example of Model T32794 in use.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
manual BEFORE
COPYRIGHT © JULY, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 07/21) #CS21968 PRINTED IN CHINA
MODEL T32794
UNIVERSAL SHARPENING JIG FOR
T32720 WET GRINDER
INSTRUCTIONS
Inventory
Description
A. Jig ............................................................... 1
B. Knob Bolts M6-1 x 22 ................................. 2
A
B
Figure 2. Inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Qty
V1.07.21