Operation; Operating The Machine - Makita DCU180 Instruction Manual

CAUTION:
Do not slide the rails beyond the
limit mark.

OPERATION

Operating the machine

NOTICE:
The front wheel is driven by battery
power in this machine. Use this machine to assist
with carrying operations.
NOTICE:
Be sure to insert the lock key in the bat-
tery box before the operation. If the lock key is not
inserted, a short beep sound is emitted when you pull
the switch trigger. The beep sound stops by releasing
the switch trigger and pulling the brake lever.
Before operating the machine, check that the brake
lever works properly.
► 1 . Brake lever
WARNING:
If the brake lever reaches the han-
dle when you fully pull the lever, the brake is not
working properly. Adjust the brake, or ask your
local Makita Service Center for repairs.
1. Select the battery cartridge with the battery selec-
tion switch.
2.
few seconds to turn the power on.
► 1 . Power button
3.
brake lever.
► 1 . Lock button 2. Brake lever
NOTE: Release the rear wheel brake if the rear
wheels are installed.
4.
1
18 ENGLISH
Press the power button on the control panel for a
Pull the brake lever to release the lock of the
1
Hold the handles firmly with both hands.
1
2