Installing Bucket; Functional Description - Makita DCU180 Instruction Manual

2. Place the carrier on the base unit, and then insert
the hexagonal bolts and washers into the frames from
the top. Tighten the washers and spring washers and
butterfly nuts from the bottom to fix the carrier.
1
3
4
5
► 1 . Long hexagonal bolt 2. Short hexagonal bolt
3. Washer 4. Spring washer 5. Butterfly nut
NOTICE:
Use the long bolts for the front, and the
short bolts for the rear.

Installing bucket

Optional accessory
Place the bucket on the base unit, insert the hexagonal
bolts into the frames, and then tighten the washers and
spring washers and butterfly nuts from the bottom to fix
the bucket.
2
3
1
2
3
4
► 1 . Hexagonal bolt 2. Washer 3. Spring washer
4. Butterfly nut
FUNCTIONAL
DESCRIPTION
Installing or removing battery cartridge
CAUTION:
before installing or removing of the battery
cartridge.
CAUTION:
cover before use. Otherwise, mud, dirt, or water may
cause damage to the product or the battery cartridge.
CAUTION:
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
CAUTION:
battery cartridge. When the high-temperature bat-
tery cartridge is used, the machine stops automati-
cally before a short beep sound is emitted, and may
cause an injury.
12 ENGLISH
Always switch off the machine
Make sure that you lock the battery
Always install the battery cartridge
Do not install the battery cartridge
Do not use the high-temperature
1