Makita DCU180 Instruction Manual page 15

CAUTION:
When the battery capacity
becomes low, a short beep sound is emitted.
If you continue to operate the machine at low
battery capacity, a long beep sound is emitted
and the machine automatically stops. When you
hear the short beep sound, pull the brake lever
and lock the brake, and then switch the battery
cartridge to a charged one or charge the battery
cartridge. When the remaining battery capacity runs
out, the machine suddenly stops automatically and
this may cause an injury.
NOTE: If you continue to pull the switch trigger even
if you hear the short beep sound, the machine stops
automatically. After the machine stops automatically,
the beep sound continues and the support brake
(electric brake) is enabled. To cancel the beep sound
and release the support brake, pull the brake lever
and release the switch trigger. Do not push the
machine forcibly without releasing the support brake.
After releasing the support brake, you can tell which
battery protection system is working by checking the
battery indicator status.
1 2
► 1 . Lighting 2. Blinking 3. Turned off 4. Overheat
protection 5. Overdischarge protection 6. Overload
protection
CAUTION:
If the beep sound is emitted while
operating on slopes or the machine stops auto-
matically on slopes, move the machine to a safe
place, lock the brake, and then switch the battery
cartridge to a charged one or charge the battery
cartridge.
If the load is large, and the beep sound is emit-
ted while operating on slopes or the machine
stops automatically on slopes, do not move the
machine forcibly. Lock the brake, pay attention to
safety and switch the battery cartridge to a charged
one, and then move the machine to a safe place.
Reduce the load before operating the machine again.
NOTE: You can check the remaining battery capacity
even if the lock key is not inserted.
3
4
5
6
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
► 1 . Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Lighted
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
15 ENGLISH
1
Off Blinking
malfunctioned.
2
Remaining
capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have