To Use The Machine As A Network Printer (Network Connection) (Mf5770 Model Only); Step 1 Specifying Network Settings - Canon imageCLASS MF5730 Software Manual

To Use the Machine as a Network Printer (Network
Connection) (MF5770 Model Only)
IMPORTANT
The machine needs to be restarted for the specified settings to become effective. To
restart the machine, disconnect the power cord, wait for at least 10 seconds, and connect
1
the power cord again.
NOTE
•
For details on specifying network settings, see Chapter 2, "Specifying the Network
Settings," in the Network Guide.
•
For additional network protocol settings, see the Network Guide.
•
For the values of the network settings, consult your network administrator or internet
service provider (ISP).
•
The machine does not support Network Scanning or PC Faxing. The printer must be
connected via USB for scanning and PC faxing.

Step 1 Specifying Network Settings

1
Press [Menu] ➞
the LCD ➞ press [Set].
MENU
2
Press
3
Press
LAN SETTINGS
1-12
Installing Software on Your Computer
6.NETWORK SETTINGS
to select <1.LAN SETTINGS> ➞ press [Set].
or
NETWORK SETTINGS
1.LAN SETTINGS
to select <1.IP ADDRESS AUTO.> ➞ press [Set].
or
1.IP ADDRESS AUTO.
or to select <6.NETWORK SETTINGS> on