■ Snapping Objects to Grid
If you activate the [Snap to Grid] setting for the cover sheet, objects are aligned
along the grid when they are moved or resized on the cover sheet.
1
On the toolbar, click [ ] (Snap to Grid) to activate the grid.
Alternatively, activate the command by clicking [Snap to Grid] from the [View] menu.
Deactivate the [Snap to Grid] setting by clicking the activated [ ] (Snap to Grid) or by
clicking [Snap to Grid] from the [View] menu.
NOTE
[Snap to Grid] is available only after this setting is specified. It does not affect objects that
are modified before this setting is specified.
■ Specifying Grid Properties
4
Follow the procedure below to specify the properties for the grid on the cover sheet,
such as type, color, and spacing. You can also specify whether to display the grid
and whether to snap objects to the grid.
1
Select [Grid Properties] from the [View] menu.
The [Grid Properties] dialog box appears.
2
Select [Show Grids].
Deselect the check box if you do not want to display the grid.
NOTE
Deselecting this check box disables the [Type] and [Color] settings.
4-66
Canon Cover Sheet Editor