Editing Objects - Canon imageCLASS MF5730 Software Manual

3
Click [Open].

Editing Objects

You can copy, move, and delete objects such as lines, rectangles, rounded
rectangles, ovals, images, and text boxes on the cover sheet.
■ Selecting an Object
1
Click the object to select.
You can also drag the pointer completely over the object.
The object is selected.
NOTE
You can also select multiple objects by holding down [SHIFT] on the keyboard and
clicking each object that you want to select, or by dragging the pointer completely over
the objects. If you want to deselect any of the objects you selected, hold down [SHIFT] on
➞
the keyboard click the objects that you want to deselect.
■ Moving an Object within the Same Cover Sheet
1
Select the object to move.
You can select multiple objects and move them at the same time.
2
Drag the selected object to the desired location.
Alternatively, use any of the four arrow keys [
in the desired direction in 0.1 mm increments.
NOTE
•
Hold down [SHIFT] on the keyboard while dragging to move the object horizontally or
vertically only.
•
Hold down [CTRL] on the keyboard while dragging to copy the selected object and drag
the copy to the desired location.
•
If [Snap to Grid] is specified, holding down [SHIFT] on the keyboard while pressing an
arrow key moves the object in the direction of the arrow in half-grid space increments. If
[Snap to Grid] is not specified, holding down [SHIFT] on the keyboard while pressing an
arrow key moves the object in the direction of the arrow in 2.0 mm increments.
], [ ], [ ], or [ ] to move the object
Canon Cover Sheet Editor
4
4-59