Canon imageCLASS MF5730 Software Manual page 132
Imageclass mf5730 series
Hide thumbs
Also See for imageCLASS MF5730:
- Basic manual (139 pages) ,
- Setup instructions (8 pages) ,
- Technical information (2 pages)
Table of Contents
Advertisement
■ [Reduce Dust and Scratches]
Scanned photos may contain white dots caused by dust and scratches. This setting
reduces the dust and scratches on photos. The default setting is [OFF].
[OFF]
[Low]
[Medium]
[High]
3
IMPORTANT
•
You cannot set [Descreen] to [ON] if [Black and White] or [Text Enhanced] is selected in
[Color Mode].
•
For scanning printed materials, the [OFF] setting is recommended.
•
If [Descreen] is set to [ON], you cannot set [Reduce Dust and Scratches] to [ON].
•
This setting may not be effective for some types of photos.
3-30
Setting Preferences and Scanning with ScanGear MF
No reduction of dust and scratches will be made.
Reduces small dust and scratch marks. With this setting, large dust or
scratch marks may remain.
Normally this setting is recommended.
Reduces large dust and scratch marks but evidence of the reduction
process may remain and may also remove delicate parts of the image.
Advertisement
Table of Contents
