Copying An Object By Using Button Or Menu Commands - Canon imageCLASS MF5730 Software Manual

2
Hold down [CTRL] on the keyboard ➞ drag the selected (copied)
object to the desired location.
NOTE
Dragging the selected object without holding down [CTRL] on the keyboard moves the
object to the new location instead of copying it.

■ Copying an Object by Using Button or Menu Commands

You can use button and menu commands to copy an object such as a line,
rectangle, rounded rectangle, oval, image, or text box on the same cover sheet or to
another cover sheet.
Follow the procedure below.
1
Select the object to copy.
NOTE
You can select multiple objects and copy them at the same time.
2
Click [ ] (Copy) on the toolbar.
You can also select [Copy] from the [Edit] menu.
3
If you want to copy the object to a different cover sheet, display
the second cover sheet.
NOTE
If the second cover sheet is open, you can select it from the [Window] menu.
4
Click [ ] (Paste) on the toolbar.
Alternatively, select [Paste] from the [Edit] menu.
The selected object is copied.
NOTE
•
You cannot copy an object to a different cover sheet by dragging.
To copy text, drag the pointer over the text to select it ➞ click [ ] (Copy) or select the
•
[Copy] command to copy it ➞ click [ ] (Paste) or select the [Paste] command. If you want
to copy text within the same text box, hold down [CTRL] on the keyboard while dragging
the selected text.
Canon Cover Sheet Editor
4
4-61