Canon imageCLASS MF5730 Software Manual page 228
Imageclass mf5730 series
Hide thumbs
Also See for imageCLASS MF5730:
- Basic manual (139 pages) ,
- Setup instructions (8 pages) ,
- Technical information (2 pages)
Table of Contents
Advertisement
Printer locks up system.
Q
Does your system setup have a problem?
A
Make sure that you have a high-quality shielded interface cable.
A
The problem might be in your BIOS. Verify that your BIOS setup is correct. (See
your computer's documentation for details.)
A
Verify that your physical memory is working correctly.
A
If you have a Toshiba laptop, change the following line in your CONFIG.SYS file:
c:\winutils\mxtime.exe
to
REM c:\winutils\mxtime.exe
Computer indicates a device time-out.
Q
Is the machine off, offline, or not connected to the computer?
A
Make sure the machine is not paused.
A
Make sure the machine's interface cable is securely connected to both the
machine and the computer.
A
Make sure paper is properly loaded from the cassette or multi-purpose feeder.
A
Reset the machine and the computer.
A
Try the print operation again.
A
Try a different cable.
5-3
Printer Problems
5
Advertisement
Table of Contents
