Step 3 Connect The Usb Cable - Canon imageCLASS MF5730 Software Manual

6
Click [Next >].
1
7
Click [Exit].

Step 3 Connect the USB Cable

1
Make sure that the machine is turned on.
Connect the USB cable after MF Toolbox installation.
2
Connect the USB cable to the machine and computer USB port.
When you connect the USB cable to the computer, the machine is automatically
detected as a new hardware. Wait for a while as your computer performs various
settings.
Depending on your computer, a message may display asking you to restart your
computer.
After restarting your computer, wait for a while for your computer to continue
performing various settings.
1-10
Installing Software on Your Computer