Installing Software On Your Computer - Canon imageCLASS MF5730 Software Manual
Imageclass mf5730 series
Hide thumbs
Also See for imageCLASS MF5730:
- Basic manual (139 pages) ,
- Setup instructions (8 pages) ,
- Technical information (2 pages)
Table of Contents
Advertisement
Installing Software on Your Computer
This section provides installation procedure of drivers to use the Canon
1
imageCLASS MF5700 Series as a network or a local printer, fax and a local
scanner (connected directly to your computer). (Fax function is available for the
MF5750/MF5770 models only.)
When installing the drivers, follow the steps shown in the [MF5700 Series Setup]
screen.
Before you install the software, be sure to:
•
Confirm the machine is not connected to your computer.
•
Turn on the machine. (See the Set-Up Instructions (for MF5730/MF5750 users) or
Set-Up Instructions for the Machine (for MF5770 users).)
•
Quit any Windows application running on your computer.
IMPORTANT
If you are using Windows 2000/XP/Server 2003, be sure to log on as a member of
Administrators.
NOTE
•
Use of a cable 9.8 ft (3 m) long or less is recommended.
•
The screen shots shown are from Windows XP. However, the installation procedure is
essentially the same for other versions of Windows.
1-4
Installing Software on Your Computer
Advertisement
Table of Contents
