Table of Contents
Advertisement
Operating Instructions MB TouchScreen ControlPanel
5.
Operating code
5.1
Code input
- Enter code
- Clear input by touching "CLR"
Acknowledge by touching "OK".
Hold-up code: PIN +
A possible tens digit is not carried over.
Depending on the panel type the operating
functions are distributed over 3 different
authorization levels or the operating functions are
allocated to the operating code (see 5.2).
The TouchScreen ControlPanel can be programmed as follows depending on the application:
for
Zone(s):
5.2
Overview of levels of authorization
MB Classic (except 561-MB256 plus):
The following overview provides information on which operating functions may require the entry of a code
according to the programming
Code 4-digit
- View detector groups
- Start Makro
- Internal arming
- TouchScreen settings
- Slideshow
MB-Secure and 561-MB256 plus:
In this control panels the individual operating functions are allocated to the operating code (MB-Secure with 4
to 8 digits, 561-MB256 plus with 1 to 8 digits).
Ask your installer for further information on the operating code (number of digits and released functions).
5.3
Variations of the code inputs
Code digits
Variations
Code 4 digits
Code 5 digits
Code 6 digits
Code 7 digits
10.000.000 possibilities
Code 8 digits
100.000.000 possibilities
(1 – 9)
Display without
PIN
Data carrier
PIN or Data carrier
PIN and Data carrier
Code 5-digit
- Clear detector groups
- Internal disable detector groups - Clear tamper detector groups
- Activate walk test
- View event memory
- Internal disarming
10.000 possibilities
100.000 possibilities
1.000.000 possibilities
Operation without
Code 6-digit
- External disabling/enabling
- Change date and time
When using a hold-up code, the
Security Grade
above specified variation possibility is
Grade 2
halved.
Grade 3
Same code for different users can not
Grade 4
be used.
Grade 4
Grade 4
PIN
Data carrier
PIN or Data carrier
PIN and Data carrier
5
Advertisement
Table of Contents
