Table of Contents
Advertisement
Operating Instructions MB TouchScreen ControlPanel
6.2
Operating menus
Area view
Information and operations concerning the alarm partition. Arming and disarming,
viewing event logs, etc..
Security screen
Selection of an area, display and overview of alarms and faults.
Automation
Starting executable macros.
Maintenance (Details see chapter 10)
Enable remote parameterisation, show maintenance date, show system
information.
Set up (Details see Chapter 11)
Display brightness, display settings, set language, configure home screen,
System settings, date/time, etc..
Show / Hide information to the buttons.
Exit operation.
6.3
LED indicators and Buzzer function
LED red lights up:
LED red flashes:
LED green lights up:
LED green flashes:
LED yellow lights up:
LED yellow flashes:
Buzzer active at:
(programmable)
Intrusion alarm
Tamper- or hold-up alarm
Unit ready for operation
Unit not ready for operation
Gereral fault of central control panel
Mains fault of central control panel
- when switch-on delay is active
- reading an ID data carrier
- in case of internal alarm (time limited)
- in case of tamper alarm or fault until manually stopped
- when clearing (system reset), walk test on
- when touching the screen as acknowledgement signal
- with door interlock function when arming and disarming
- with reminder signal after alarm and external disarming
- in case of faults
- Additional functions programmable by installer
(output programming)
7
Advertisement
Table of Contents
