Keypad Basic State; Home Screen - Honeywell 013080 Operating Instructions Manual

6
6.

Keypad basic state

6.1

Home screen

In the basic state the screen is dark.
In case of alarm, the display is activated to achieve a better signalling effect.
In normal operating mode, after a touch, depending on the settings of the TouchScreen ControlPanel:
- the home screen with the area view,
- or the home screen with the security screen overview will be displayed.
Pressing the " [→ ", key at the top right of the display exits the operating mode and the display is darkened
again.
If there is no more input, the display changes to the home screen or to the dark-controlled mode after a
programmed time.
Touch the screen surface to switch the display illumination back on and return to the operating mode.
Tap
To select menu icons or press
buttons on the display or to
confirm a selection from a list, tap
each with one finger.
More functions
This selection area contains the other functions for operating the panel. Depending on the
programming, these buttons are always visible or only after tapping the button
Selecting an alarm partition
If you tap on a selected alarm partition (alarm zone), this area is
displayed in the security screen window view.
Operating Instructions MB TouchScreen ControlPanel
è
More functions.
Swipe
Swipe your finger up and
down on the screen or a
list to display more fields
and information.