Table of Contents
Advertisement
Operating Instructions MB TouchScreen ControlPanel
1.
Safety notes
Read this manual carefully and completely before installing and starting up the device. It contains
important instructions on installation and operation.
The device is designed to state-of-the-art technological standards. It should only be used:
- correctly and
- in a technically perfect and correctly installed condition
- in accordance with the technical data.
The manufacturer is not liable for damage resulting from incorrect use.
Installation, programming, maintenance and repair work should only be carried out by authorised skilled
personnel.
Soldering, connection and installation work within the overall system should only be realised in a
deenergised condition. Soldering work should only be realised with a soldering iron with temperature
control which is galvanically isolated from the mains power supply.
German electrical standards and regulations of local electricity suppliers should be observed.
The MB TouchScreen ControlPanel operating module should not be used in rooms where
there is a risk of explosion or where vapours may decompose metal or plastic materials.
This symbol on our product shows a crossed-out "wheelie-bin" as required by law regarding the
Waste of Electrical and Electronic Equipment (WEEE) disposal. This indicates your
responsibility to contribute in saving the environment by proper disposal of this Waste i.e. Do
not dispose of this product with your other wastes. To know the right disposal mechanism
please check the applicable law.
2.
General
By deciding to install an intrusion detection control unit, you have taken a step towards greater security. In
the control unit unites are the most up-to-date electronics, innovative technology and years of experience
of one of the largest manufacturers of intrusion detection systems in one highly-developed product.
The large number of operating options and alarm types and the extensive programming options
guarantee ideal adaptation to your individual security requirements.
If the control unit is also fitted with an integrated telephone dialling device, a silent alarm can be
transmitted via the public telephone network to the digitized receiving control unit of a commissioned
security firm. The security firm can then take the necessary steps (e.g. police operation). There is also the
possibility of triggering a local alarm, if the relevant person cannot be reached.
If your control unit is installed for remote parameterization, the installer can access the intrusion detection
control unit via remote programming (e.g. to change a telephone number).
These instructions explain how to work with the control unit at user level. You will learn all you need to
know about operating the device, from the functions of the display and operating elements to simple
troubleshooting.
Programming which affects the system is reserved for the installer. Please contact the installation
company if you have any problems, desires to upgrade the system, etc.
Very few operating procedures are required in normal, everyday operation. This means that knowledge of
operating and general handling can be quickly forgotten under certain circumstances. These instructions
should therefore, be stored in the immediate vicinity of the device so that they are at hand when required.
Important information!
Depending on the type of panel and the panel programming not all functions described in
this manual are possible.
3
Advertisement
Table of Contents
