Table of Contents
Advertisement
8
7.
Area view
The Area View button opens
the preferred area defined for
this panel within the panel
programming. If no preferred
area is programmed, the first
assigned area of the panel
appears.
The area view is used to operate the selected alarm partition of the panel. This view allows a quick
overview of the status of the panel's zone. Messages are highlighted in colour and displayed in plain text.
The selected area can be switched intuitively. To do this, use the symbol buttons
external arming / and again
desired operation.
If messages, faults or alarms are pending, the alarm partition/zone cannot be armed. This can be
è
recognised by a
dark symbol button. The pending messages can be queried and are shown on the
display.
Button brightness dark
Display indication
Button bright, tap the button
Button dark
Display indication
Button bright, tap the button
Tap the button
Tap the button
Tap the button
è
disarming. A single tap with the finger is all you have to do to perform the
è
Internal arming not possible.
è
Observe upcoming messages for internal arming.
è
Internal arming possible .
è
external arming not possible.
è
Observe upcoming messages for external arming.
è
External arming possible .
è
Disarming operation for the alarm partition.
è
More Messages.
Display of upcoming Messages of the alarm partition/zone.
è
More functions to open the operating menu for further functions.
Operating Instructions MB TouchScreen ControlPanel
è
è
internal arming /
Advertisement
Table of Contents
