Security Screen; Filter For View Of Alarm Partitions - Honeywell 013080 Operating Instructions Manual

12
8.

Security screen

T h e s e c u r i t y s c r e e n
overview button opens the
view of all alarm partitions.
The security screen overview provides a quick overview of the status of the individual alarm
partitions/zones of the panel. Messages are highlighted in colour and displayed in plain text.
The TouchScreen ControlPanel can be switched to another operating area/alarm partition. A single touch
is sufficient to select the desired alarm partition/zone
If another operating code / operating authorisation is required for the alarm partition/zone selected there,
this is indicated by ***. If an alarm partition marked with *** is selected. the display automatically changes
to the "Code input" or the following message appears: "No authorisation for this area".
8.1

Filter for view of alarm partitions

To get a quick overview of disarmed partitions/zones as well as partitions with alarms, filters can be set.
Areas that do not correspond to the filter are hidden. Tapping once sets the filter, tapping again resets the
filter (toggle function).
Show only disarmed Areas NUR BEREICHE MIT ALARM ANZEIGEN
Show only Areas with Alarm
The filter can be combinated (e. g. show only disarmed partitons with alarm).
Operating Instructions MB TouchScreen ControlPanel
è
Only disarmed partitions/zones are displayed.
è
Only partitions/zones with alarms are displayed.