Bedienteil, Fronteinheit, inklusive Elektronik - Rückwand - Montagematerial 013081 wie 013080, jedoch Farbe schwarz Einsatzmöglichkeiten Das Bedien- und Informations-Kommunikationsgerät TouchScreen Bedienteil ist vorzugsweise für den Betrieb an der Zentralen-Baureihe MB-Secure vorgesehen. Das TouchScreen Bedienteil kann auch an einer Zentrale der Baureihe MB-12, 561-MB24/48/100/256 plus eingesetzt werden, z.B. als Ergänzung oder Austausch von bereits verbauten BUS-2 Bedienteilen.
Bedienteil Wichtiger Hinweis zur Bedienung Die Bedienungsanleitung für das TouchScreen Bedienteil mit der Nummer P00471-02-000-xx steht unter www.honeywell.com/security/de im Service-/Downloadbereich unserer Homepage zum Download bereit. Der Errichter hat die Möglichkeit, diese Anleitung herunterzuladen, entsprechend der Programmierung auszufüllen und dem Betreiber an die Hand zu geben.
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil Geräteaufbau Vorderseite mit LED-Anzeigen LED rot (Glockensymbol) Leuchtet: Einbruchalarm Blinkt: Sabotage- oder Überfallalarm LED gelb (Infosymbol) Leuchtet: Allgemeine Störung der Zentrale Blinkt: Netzstörung der Zentrale (nicht bei MB-Secure). DUO LED grün/blau (Symbolhaken) Leuchtet grün: Gerät ist betriebsbereit Blinkt grün: Gerät ist nicht betriebsbereit Datenträger-Lesefeld...
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil Installationsrichtlinien Beachten Sie die Installations- Bedienteil Zentrale BUS-2 hinweise in der Errichter- anleitung der Zentrale. Daten (A) Daten Die BUS-Anschlussleitung muss als eine abgeschirmte, paarweise verseilte Leitung ausgeführt sein. Hinweis: Am BUS darf kein Abschlusswiderstand angebracht werden. Die entsprechenden Leiterquerschnitte sind in der Installationsanleitung der Einbruchmelderzentrale (Kapitel Leitungen) zu entnehmen.
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil Rückwand montieren 18,6 Zum Ausbrechen der Kabeleinführungen Schraubendreher in der Mitte ansetzen und aushebeln. Legende: Montage (auf Putz): Befestigungsbohrungen (Montage auf Putz) Die Rückwand kann als "Bohrschablone" verwendet werden. Kabeleinführungen Rückwand befestigen: Abreißsicherung Bedienteil - Schrauben Sie die Rückwand an den mit Haltestege gekennzeichneten Stellen auf einen sicheren Wandbefestigung für die Abreißsicherung...
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil Hohlwandmontage der Rückwand Die Rückwand kann mit den beiliegenden 4 Montagekrallen und den 4 selbstschneidenden Schrau- ben in einer Hohlwand montiert werden. Eine Hohlwandmontage der Rückwand, ohne Verwendung der Montagekrallen, ist mittels den Montagebohrungen am Rahmen möglich, beachten Sie hierzu das Kap. 9.2. Montage (Hohlwand): Wand-Aussparung: Wand-Aussparung mit 188 x 132mm anfertigen.
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil Fronteinheit einhängen Beachten: Vor dem Einhängen der Fronteinheit die BUS-2 Adresse einstellen. Beachten Sie hierzu das Kap. 10. N a c h e r f o l g t e m A n s c h l u s s u n d Einstellung der BUS-2 Adresse, wird die Fronteinheit zuerst von oben in die Rückwand eingesetzt.
DESFire EV1/EV2 kann die Lesedistanz bei EV1-Datenträgern etwas geringer sein. Hiermit erklärt die Novar GmbH, dass der Funkanlagentyp MB TouchScreen Bedienteil, Art.- Nr. 013080 und 013081 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung steht auf unserer Homepage im Service/Downloadbereich unter https://www.security.honeywell.de/ zum Download bereit.
Montage-Anschluss-Anleitung MB TouchScreen Bedienteil 13. Anhang 13.1 Firmware-Update 13.1.1 Programmierung der Speicherkarte Für das Einspielen einer neuen Firmware in das TouchScreen Bedienteil ist eine Micro SD- Speicherkarte (max 16 GB) erforderlich. - Firmware-Datei im Downloadbereich unserer Homepage herunterladen, entpacken und in das Root-Verzeichnis der Speicherkarte kopieren.
MB- TouchScreen ControlPanel. Hold the data carrier in front of the device - approximately in the middle of the Honeywell logo. There is the reading field. Whether a data carrier is required for the authorization, will be determined on the panel programming.
Important operating information The operating instructions for the TouchScreen ControlPanel with the number P00471-02-0G0-xx can be downloaded from www.honeywell.com/security/de in the service/download area of our homepage. The installer has the option of downloading these instructions, filling them out according to the programming and giving them to the operator.
Mounting and Connection Instructions MB TouchScreen ControlPanel Overview Front view and LED indication LED red (Symbol bell) Lights up: Intrusion alarm Flashes: Tamper- or hold-up alarm LED yellow (Symbol info) Lights up: General fault of the panel Flashes: Mains fault of the control panel (not MB-Secure).
Mounting and Connection Instructions MB TouchScreen ControlPanel Installation guidelines Observe the information for Operating unit Panel BUS-2 i n s t a l l a t i o n i n t h e installation instructions Data (A) manual for the control Data panel The BUS connecting cable...
Mounting and Connection Instructions MB TouchScreen ControlPanel Mount the back case 18,6 To bring out the cable inlets, place the screw driver in the center and pivot them out. Legende: Mounting (surface mounting): Fixing holes (Surface mounting) The back case can be used as a "drilling template". Cable inlets Preparation: Tear-off protection...
Mounting and Connection Instructions MB TouchScreen ControlPanel Cavity wall mounting of the back case The rear wall can be mounted in a cavity wall using the 4 enclosed mounting claws and the 4 self- tapping screws. It is possible to mount the back case in a cavity wall without using the mounting claws by means of the mounting holes on the frame, see chapter 9.2.
Mounting and Connection Instructions MB TouchScreen ControlPanel Mounting front device Note: Set the BUS-2 address first before attaching the front device into the back cover. Please refer to chapter 10. After connecting and setting the BUS-2 address, the front device is first inserted from above into the back cover.
Hereby, the Novar GmbH declares that the radio equipment MB TouchScreen PanelControl, Item no. 013080 and 013081 is in compliance with Directive 2014/53/EU. T h e f u l l t e x t o f t h e E U d e c l a r a t i o n c a n b e d o w n l o a d e d f r o m o u r h o m e p a g e https://www.security.honeywell.de/ Service / Download.
Mounting and Connection Instructions MB TouchScreen ControlPanel 13. Appendix 13.1 Firmware update 13.1.1 Programming the memory card A micro SD memory card (max. 16 GB) is required for importing new firmware into the TouchScreen ControlPanel. - Download the firmware file from the download area of our homepage, unzip it and copy it into the root directory of the memory card.