Table of Contents
Advertisement
ELECTRICAL CONTROL TO THE PV SYSTEM
• The PV system will be getting 115V from the Flare Fireplace board.
• The PV system will be getting 115V from the Flare Fireplace board.
• The PV system is connected to the Fireplace control system with a High voltage 4 wire cable - labeled below as
connection "PV Power 115V".
• Cable to be used is 16 AWG-4 copper wire . Cable is not included with the PV kit and can be sourced spertly.
• Connect 4 wire high voltage cable from the Power Vent to matching colors - white to white, black to black & green to
green and red to red on the PV system.
• The Flare Fireplaces Fan board is a must for operating a Flare Fireplace with a PV system.
49 |
P a g e
DG Bypass Switches
Up: Bypass | Down: Check
Advertisement
Table of Contents
