External Tempered Glass Removal - Double Glass Fireplace - Honeywell Flare Front Series Installation Manual

EXTERNAL TEMPERED GLASS REMOVAL – DOUBLE GLASS FIREPLACE
Follow the procedure below to remove and install back the fireplace external glass (double glass fireplace configuration).
Warning! Turn off the fireplace and allow time for the unit to cool before proceeding.
Warning! Double glass fireplace should NOT be operated without the external glass
•
Confirm lock screws have been removed during install (should be done once, during install only).
•
Attach glass suction cups to the glass. Use more than one suction cup if needed (any unit above 45").
•
Using suction cups, slightly push in the external glass top edge.
•
Once glass has been pushed, slightly lift the glass to clear bottom part of the glass.
•
Remove the glass and place in a secure location.
Install back external glass
•
Attach glass suction cups to the glass. Use more than one suction cup if needed (any unit above 45")
•
Place upper edge of the glass in position and push latching trim.
•
Once trim has been pushed in, slide glass top in position.
•
Tilt in bottom edge of the glass in position as you are lifting the glass up.
•
Glass is now secure in place. No bolts are needed to lock the glass.
14 | P a g e
Note: Suction cups are needed to remove the glass.
Caution: The glass is very fragile and should be handled with care.