Fireplace Positioning - Honeywell Flare Front Series Installation Manual

FIREPLACE POSITIONING

Once Fireplace has been set to the upright position, it can be moved to its final installation location.
•
Make sure the control unit is secure and not dragging on the floor during transport and positioning.
•
Unit should remain on the pallet during transport inside the site location.
•
When positioning the fireplace, take into consideration the clearance requirements and framing. Use the
manual clearance guide for more details.
•
Attach the fireplace top brackets to the metal stud in the back to secure the fireplace in place. The bracket
length can be adjusted by releasing the screws on the top.
Fireplace should remain on the wood pallet when carried to final installation location.
Do not attempt to use a pallet jack or any other moving tools if the unit has been removed from the wood pallet as it may harm
Make sure to use only non-combustible material in case top the brackets need to be extended to connect to the
back or sides.
26 | P a g e
the fireplace components under the unit.