Honeywell Flare Front Series Installation Manual page 30

Mode selection and remote
NUMBER
1 STATIC WHITE
2 WHITE COLOR GRADUAL CHANGES
3 ALL COLORS GRADUAL CHANGES
RED/GREEN/BLUE 3 COLORS GRADUAL
4
CHANGE
5 7 COLORS JUMP TO CHANGE
6 3 COLORS JUMP TO CHANGE
7 RED/GREEN JUMPS TO CHANGE
8 REB/BLUE JUMPS TO CHANGE
9 BLUE/GREEN JUMPS TO CHANGE
10 WHITE COLOR FREQUENTLY BLINKS
11 WHITE COLOR GLITTERS
12 RED COLOR FREQUENTLY BLINKS
13 RED COLOR GLITTERS
14 GREEN COLOR FREQUENTLY BLINKS
15 GREEN COLOR GLITTERS
16 BLUE COLOR FREQUENTLY BLINKS
17 BLUE COLOR GLITTERS
18 YELLOW COLOR FREQUENTLY BLINKS
19 YELLOW COLOR GLITTERS
20
Code Matching:
Please follow the instructions below:
- Confirm it is correctly connected between power supply, LED controller & LED load.
- Switch the power off, then switch it on again, & press key 5 once (within 3 seconds) the moment you see
the light is on.
- The LED will blink twice slowly when it is completed.
Code Clearing:
The code can be cleared as needed. The kit (remote & controller) will stay in the original state after code clearing and
can work again when code re-matching is done.
Please follow the instructions below:
Confirm it is correctly connected between power supply, LED controller & LED load.
- Switch the power off, then switch it on again, & long press key 5 (within 3 seconds) the moment you see
the light is on.
- The LED blinks 9 times swiftly when completed.
30 | P a g e
MODE
CIRCULATION MODE
BRIGHTNESS
STATE SPEED STATE
ADJUSTABLE UNADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE
ADJUSTABLE ADJUSTABLE