Table of Contents
Advertisement
Cisco Webex DX70 and DX80
Introduction
UserManagement PasswordPolicy Complexity MinimumDigits
When signing in to the device as a local user, the password must follow the rules set by
the UserManagement PasswordPolicy settings. These settings replace the "systemtools
securitysetting" command that was available in software versions older than CE9.10.
A new password rule will not apply to existing passwords but will take effect on the next
password change.
This setting specifies the minimum number of numerical characters (0..9) in the password.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..4)
The minimum number of numerical characters. 0 means no restrictions.
UserManagement PasswordPolicy Complexity MinimumLength
When signing in to the device as a local user, the password must follow the rules set by
the UserManagement PasswordPolicy settings. These settings replace the "systemtools
securitysetting" command that was available in software versions older than CE9.10.
A new password rule will not apply to existing passwords but will take effect on the next
password change.
This setting specifies the minimum number of characters in the password.
Requires user role: ADMIN
Default value: 8
Value space: Integer (0..256)
The minimum number of characters. 0 means no restrictions.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
UserManagement PasswordPolicy Complexity
MinimumLowercase
When signing in to the device as a local user, the password must follow the rules set by
the UserManagement PasswordPolicy settings. These settings replace the "systemtools
securitysetting" command that was available in software versions older than CE9.10.
A new password rule will not apply to existing passwords but will take effect on the next
password change.
This setting specifies the minimum number of lower-case letters in the password.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..4)
The minimum number of lower-case characters. 0 means no restrictions.
UserManagement PasswordPolicy Complexity MinimumSpecial
When signing in to the device as a local user, the password must follow the rules set by
the UserManagement PasswordPolicy settings. These settings replace the "systemtools
securitysetting" command that was available in software versions older than CE9.10.
A new password rule will not apply to existing passwords but will take effect on the next
password change.
This setting specifies the minimum number of special characters in the password.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..4)
The minimum number of special characters. 0 means no restrictions.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
153
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
